View Single Post
  #6  
Old 03-08-2022, 12:42 PM
KenH KenH is offline
Steel Addict
 
Join Date: Dec 2012
Location: South Baldwin Co across the bay from Mobile, AL
Posts: 129
Chris, when you talk about "carbon transfer", do you mean with the SS cladding almost showing the carbon steel thru the SS? That might be what I had that to happen on a blade. I used .040" 26C3 for the core with a .062" cladding on each side. Once it was all forged up, ground smooth, and thinned down to .090" or so the SS almost didn't show up at all. Almost as if it were carbon steel.

Is that what you mean by "carbon transfer"?
Reply With Quote