This is
the way I do my COKE BOTTLE handle
First make a pattern the size and shape
you want the handle and set where the tang will go.Then
scribe this pattern on your metal,grind to the lines
and remove the metal where the tang goes.
Dress up the sides to make it Flat
so your scales fit tight.
You will need something to scribe a
line even around the piece,This is so your pins will
all be the same distance from the edge.
I took an old pair of calipers that
the dial wasnt any good any more and ground a point
on it for this step...You can hard solder a carbide
scribe on the top jaw also.
Continue
this tutorial
.
|
